Why do some people sell waste electrodes at black powder prices while others only get scrap aluminum prices?
Date:2026-11-20 Views:5
The waste electrode pieces from lithium power plants have always been inconspicuous on the books, but there are more and more things piled up in the warehouse. The head and tail materials of the coating machine, the cut edges, and the scrapped coils without liquid injection - these materials have a much higher grade than the original ore, including positive electrode materials, aluminum foil, and copper foil.
But where did these materials end up? One type is when metal waste is weighed by tons to recyclers, which is equivalent to selling the positive electrode material at the price of aluminum foil; Another type is crushing and powder production, which may appear to have been processed, but the powder is mixed with copper and aluminum shavings, residual glue, and varying particle sizes, and can only flow to low-end channels, with prices not rising and often being suppressed by downstream indicators.
The problem is never whether it can be broken or not, but whether it can be saved or not.
Whether the positive electrode material can re-enter the positive electrode material supply chain mainly depends on impurities (Cu, Al, magnetic foreign matter Fe), whether the crystal structure is complete, and the consistency of moisture and particle size. If any of these three items are missing, the customer will not receive the repair material, but will only lower the price based on the recycled material. The price difference lies here.
The core of Hefei Hengli's waste electrode sheet repair solution is an atmosphere rotary furnace that has been used in waste battery recycling projects. The path is simple: the electrode sheet is first cut and shredded to control the size of the incoming material, and then enters the rotary furnace to decompose the PVDF binder under controlled temperature and atmosphere, allowing the powder and current collector to naturally dissociate; After discharge, it undergoes screening, demagnetization, and sealed transportation and packaging. The entire process relies on debonding rather than mechanical hard peeling - hard peeling will knock aluminum and copper chips into the powder together, and impurities mainly come from this step.
The truly challenging aspect of this process is the temperature window. The PVDF decomposition is not complete when the temperature is low, and the powder and foil cannot be separated, resulting in residual tape entering the powder; When the temperature rises, the structure of the positive electrode material is damaged, lithium begins to evaporate, and the capacity of the produced material cannot be increased, making repair meaningless. The window is narrow, so the temperature uniformity and atmosphere stability inside the furnace have become the parameters that determine success or failure - the same batch of materials should have consistent processing results at the beginning and end, which relies on more than 30 years of thermal accumulation, not formula.
Environmental synchronous design, no post installation: organic waste gas, dust, and fluoride are treated together, with VOCs emissions below 40mg/m ³, fluoride emissions below 3mg/m ³, and particulate matter emissions below 20mg/m ³. The indicators are ahead of national standards and can also meet local standards.
The value of a set of waste treatment equipment is ultimately reflected in which price range it sends materials into. The significance of repair is not to dispose of these materials, but to restore their eligibility to be purchased by positive electrode material factories as raw materials.
