The trend of ternary retirement is approaching, should the recycling line still be built according to the idea of lithium iron phosphate?

Date:2026-11-20 Views:5

The vast majority of retired batteries that have entered the recycling channel in the past few years are lithium iron phosphate. Low energy density, small residual power, and limited black powder value, the industry's requirements for production lines are focused on processing capacity and low cost.

 

But starting from this year, in the next two to three years, the early installed ternary models will gradually come out of warranty, and the amount of high nickel system materials will increase. This batch of materials is more valuable and more difficult to handle. Many production lines built in the previous round of expansion were configured according to the characteristics of lithium iron phosphate materials - nitrogen protection for charged crushing, conventional pyrolysis, and standard exhaust gas. Dealing with LFP is sufficient, but if we switch to three yuan, we need to recalculate the accounts.

 

The logic of nitrogen positive pressure protection relies on continuous air supply to dilute the oxygen content inside the chamber. Aging of seals, disturbances in feed, and fluctuations in operating conditions can cause fluctuations in oxygen content. When dealing with lithium iron phosphate, this fluctuation can cause smoke at most; Dealing with ternary batteries with high residual power may lead to explosion if the oxygen content exceeds the limit once, at the cost of shutdown, rectification, and re evaluation.

 

Hefei Hengli's approach is to change direction: the crushing chamber maintains a closed negative pressure throughout the entire process, combined with a step-by-step structure of displacement chamber crushing chamber buffer chamber, using physical pressure difference to block the intrusion of external air. The risk is placed in the structure, rather than left to the fire and emergency departments at the back end.

 

In a positive pressure environment, dust and electrolyte vapor always find gaps to escape. The price of three yuan black powder is there, and all that runs away is money; The leakage of electrolyte into the workshop is an environmental and occupational health issue, and it is also the most difficult part to explain during inspections. Negative pressure confines both materials and gases within the system, preventing dust from escaping. The electrolyte is collected and sent to the backend for processing, and also serves as fuel for the incineration unit.

 

The fluorine content of ternary materials is higher. If the electrolyte is carried all the way into the pyrolysis section, hydrofluoric acid will be generated at high temperatures, accelerating the corrosion of furnace tubes and seals. The frequency of maintenance and spare parts expenses will also increase accordingly. The electrolyte should be collected at the front end before the corrosion source at the back end can be reduced; The furnace tube is made of special corrosion-resistant alloy and manufactured through explosive composite process, which is a choice made for this working condition, rather than a generic material.

 

The environmental protection system should not be a patch installed at the end. The fluorine-containing organic waste gas adopts a combination route of incineration, rapid cooling, and multi-stage purification. The furnace is built with special chrome corundum to resist the corrosion of high-temperature fluorine-containing flue gas and ensure that the waste gas stays fully in the high-temperature zone; The high calorific value exhaust gas in the front and middle sections is reused as fuel, and the dependence of the entire line on purchased natural gas decreases accordingly.

 

The material structure of retired batteries is changing, and the selection logic of production lines should also change accordingly. The line built today to save money with lithium iron phosphate may not be able to withstand the wave of materials with three yuan tomorrow.