From retired polarizer to high-value black powder: Hengli's systematic practice of directly repairing production lines

Date:2026-09-15 Views:155

The value center of the lithium battery industry is extending from the manufacturing end to the recycling end. Compared to pyrometallurgy and hydrometallurgy, which require the material to be "overturned and restarted", direct repair of electrode plates only removes the binder and current collector, while retaining the lattice skeleton of the active material. This significantly reduces energy consumption and carbon footprint, and is becoming one of the mainstream routes for positive electrode regeneration. In our view, the repair of polarizer is not just about a pyrolysis furnace, but more about a complete engineering chain covering "current collector stripping binder removal lattice regeneration" - the accumulation of more than 30 years of thermal and resource recycling equipment has settled on this chain.

 

The heart of the production line is the atmosphere rotary furnace: PVDF is directionally cracked in an inert or weakly reducing atmosphere, allowing for efficient separation of aluminum foil, copper foil, and positive electrode black powder, with a comprehensive black powder recovery rate of over 98%; Compared to traditional crushing and powder making, foil oxidation and impurity entrainment are suppressed at a lower level. From electrically charged safe crushing, drying and liquid removal, to high-temperature pyrolysis, multi-stage sorting, oxidation/reduction roasting and repair, and finally to end of pipe exhaust treatment, all stages are self-developed and complete sets; The waste gas from the crushing and drying section is reused as fuel, and fluoride emissions remain stable below 3 mg/m ³. The risks of VOCs and dioxins are intercepted at the process end, rather than transferring the burden to the end facilities.

 

On the material side, the same production line can adapt to both lithium iron phosphate solid-state calcination and lattice reconstruction oxidation calcination of ternary systems; The particle size distribution and gram capacity of the regenerated powder approach the level of new materials, and the value loop of "waste electrode sheet - high-value black powder - composite positive electrode" is thus opened.

 

There is no end to technological evolution, and our pre research focuses on four coordinates for the next generation of direct repair equipment: stricter low oxygen partial pressure control of high nickel ternary system, lithium compensation accuracy of lithium iron phosphate supplement roasting, collaborative regeneration of negative graphite and positive electrode production line, and maintenance of lattice repair consistency after production line enlargement.

 

There is only one standard to measure these investments - the approximation degree of the gram capacity and cycle life of recycled powder to new materials; Every time the oxygen content drops to the ppm level on the equipment side, and every more refined temperature curve is pushing the scale to full marks. The fuller the scale, the closer it is to high-value black powder. This is the ultimate answer to Hengli's systematic practice of directly repairing production lines.